

GE DISPOSALL® 1/2 HP Continuous Feed Garbage Disposer - Non-Corded
Model# GFC520N
$129.99
- Style:
- Disposers
- Height:
- 13 inches
- Width:
- 6 inches
- Depth:
- 5 inches

1/2 HP Motor
A reliable 1/2 HP motor helps this garbage disposal quickly reach its maximum spin speed, so it can grind food faster without jamming or clogging. This is the recommended high-speed disposal for a family of 2-4 people

Over 2,600 RPM
Perfect for owners who cook often, this over 2,600 RPM food disposal spins at a high speed to finely grind tough foods like cooked meat, beans, seeds and potato peels.

Easy Installation
This DIY, easy installation food disposal only requires a few steps and has everything you need included in the box.
CAPACITY | |
Unit Capacity | 25 oz hopper |
APPEARANCE | |
Color Appearance | Black |
WARRANTY | |
Labor Warranty | Limited 7-year entire appliance |
Parts Warranty | Limited 7-year entire appliance |
Warranty Notes | See written warranty for full details |
POWER / RATINGS | |
Volts/Hertz/Amps | 120 V; 60 Hz; 4.5 A |
Power Connection | Direct Wire |
ECONOMICAL / QUIET | |
Quiet Package | Standard |
ACCESSORIES | |
Sink Flange Kit | Stainless Steel |
3 Bolt Mount Adapter Kit PM3X214 | Included |
WEIGHTS & DIMENSIONS | |
Dishwasher Inlet Diameter | 0.75 in |
Overall Height | 12.6875 in |
Approximate Shipping Weight | 9 lb |
Overall Depth | 5.1875 in |
Net Weight | 8 lb |
Drain Outlet Diameter | 1.5 in |
Overall Width | 5.5 in |
FEATURES | |
Precutter Material | Galvanized Steel |
Motor Horsepower | 1/2 hp |
Product Type | Disposers |
Hopper (grind chamber) material | Glass Reinforced Nylon |
Armature Shaft Material | Cold-Rolled Carbon Steel |
Feed Type | Continuous |
Grinding Speed (RPM) | 2600 RPM's |
Mounting Type | EZ Mount |
Control Type | Wall Switch |
Disposer Features | 2 Level Precutter Drain Connector Drain Elbow DrainPurge Technology Manual Reset Overload Protector Sink Stopper Splash Guard - Non-Removable |
Grinding Ring Material | Galvanized Steel |
Impellers | Dual Swivel Jam Resistant Stainless Steel |
Turntable Material | Galvanized Steel |
Part Type | Continuous Feed Disposers |
Installation Instructions | Click here to download |
---|---|
Quick Specs | Click here to download |
Use and Care Manual | Click here to download |
Warranty | Click here to download |
Enter Your Review:
Fields marked with an asterisk (*) are required.
Works great
Submitted 05-22-21
done Yes, I would recommend this to a friend
www.ge.com
I had the same type GE disposal previously, but after over 10 years, it needed replacing. That's why I chose the same one again. Always did the job.
Replaced GFC520V
Submitted 03-20-21
done Yes, I would recommend this to a friend
www.ge.com
Orig. GFC520V still works, but the grinding tabs both came out of their pressed fit on top of unit. Unit lasted 4 years. But otherwise happy with this product, that’s why I replaced with same unit.
GE GFC520N
Submitted 01-15-21
done Yes, I would recommend this to a friend
www.ge.com
Easy change out from previous model that lasted 20 years.
Easy installation
Submitted 11-10-20
done Yes, I would recommend this to a friend
www.ge.com
Easy to install with easy to follow instructions. Very happy with how simple it was to replace an existing, nonworking disposer with this unit.
I bought one for my previous house too
Submitted 10-09-20
done Yes, I would recommend this to a friend
www.ge.com
Great! It is very powerful. We had this unit for ten years in our previous house. When we bought our current house, my wife wanted that GE unit installed in it too, even though the Existing brand was working fine. One of the great features is that you can take the rubber drain filter out of the drain and clean it and place it back in. If I ever buy another house, I will buy it again!!!! You should too!
CALIFORNIA RESIDENTS ONLY - WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov