
- Style:
- Icemaker Kits
- Energy Star:
- No
Product Line | Water Filters |
Size | None |
Color | White |
Dimensions and Volume | |
Retail Packaging Height | 6 1/5" |
Retail Packaging Width | 4 1/5" |
Retail Packaging Depth | 4 1/10" |
Volume | 0.74 Cu. Ft. |
General Specifications | |
Country of Origin | USA |
Filter Location | Back Top-right |
Filter Type | Water Filter |
Flow Rate | 0.375 gpm |
Genuine Replacement Part | Yes |
Installation Action | Three step install |
Item Package Quantity | 2 |
Maximum Operating Temperature | 100 F |
Minimum Operating Temperature | 33 F |
Minimum Working Pressure | 30 psi |
Maximum Working Pressure | 100 psi |
Product Weight | 11.4 lbs |
Rated Capacity | 200 Gallons |
Recommended Change Frequency | 3 - 6 Months |
Performance Certifications and Approvals | |
ANSI Certified | Yes |
NSF Certified | Yes |
Use and Care | |
Care Instructions | Installation and Care InstructionsNOTICE: Review Frigidaire Refrigerator Use and Care Guide before installation and use of system. See fits models listing on Frigidaire.com. 1. Twist off the filter housing. Remove the current filter and discard. and discard.2. Place filter nozzle side up and twist the filter housing back in place. 3. Run water through the dispenser for approximately 3 minutes, or 1.5 gallons, to prime the filter before use. Discard the water.4. Replace every 6 months or 200 gallons (757 liters), whichever comes first. |
Dishwasher Safe | No |
Product Specifications Sheet (English) | Click here to download |
---|
Enter Your Review:
Fields marked with an asterisk (*) are required.
Fits perfectly
Submitted 05-28-21
done Yes, I would recommend this to a friend
frigidaire.com
Bought replacement filter for old fridge and worried about fit based on reviews. But give it a slight push and it pops right in place. No problem at all. Perfect!
Genuine part but tricky to install
Submitted 05-05-21
done Yes, I would recommend this to a friend
frigidaire.com
We needed to replace our filter but I was nervous after reading several reviews that indicated that it wouldn't fit in the cup. I called customer service, verified the correct part and hoped for the best. It is tricky to install. My husband had to first force it into the cup, then we lowered the top shelf so that we could insert it into the proper place. I think normally you would fit the filter then twist the cup over it. Like I said, tricky but it works and we did not need to buy a new cup cover.
CALIFORNIA RESIDENTS ONLY - WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov